Mace™ Motion Alert is an affordable passive infrared motion detector that detects motion in any selected area in your home, office or rv using wireless motion detector technology.

The Mace wireless security systems are:

• Small and compact
• Portable and can be used for travel
  
• Economical enough for any household
• Installs in minutes using only a screwdriver or mounting tape
• Battery operated eliminates any need for wiring
  

Compact and attractive, these Mace wireless alarm systems mount easily (vertically or horizontally) near any entry area. They are battery operated, eliminating any need for wiring making Mace Motion Alert one of the most desirable wireless security systems out there. 

The Mace wireless motion detector alarm can be coded with a personal security code and can be set to utilize a two-tone entry chime, instead of the 105 decibel alarm sound. Mounting screws and AC connector included. You may also use mounting tape if you want to avoid holes. (9-volt battery not included) 

The Mace wireless motion detector alarm is fully programmable for length of alarm and for entry delay timing. This is just yet another one of the most reliable wireless security systems we offer. Plus check out our: 

Risk-Free money back guarantee

That's right. Try any of our wireless security systems risk-free for 6 months and if you aren't completely satisfied simply contact us for a no questions asked refund. That is how confident we are in our products. 

Infrared Wireless Motion Detector with Security Alarm

Unique passive infrared system concentrates on the protected area you select. The wireless motion detector alarm studies the area and responds with a 105 decibel alarm only when a person moves into the protected area. 

In the entry chime mode, the chime will "ding" each time motion is detected. The wireless motion detector alarm can provide valuable protection for your home and property. No wiring required, battery operated and easy installation.

Features:

• Wireless motion detector detects motion and activates alarm
• Programmable security code and entry delay timing
• Built-in high output 105 decibel alarm
• Alarm/door chime option
• Panic button will trigger alarm immediately for an emergency situation
• Program and low battery indicator
• Verification tone for keypad and arm/disarm
• 9 volt battery operated (battery not included)  and AC adapter compatible
• 110 degree operating range out to 40 feet

There is a 60 second delay after the arming for sensor warm up and exit delay. When activated, the alarm cycles twice with 30 or 60 second rest in between. The duration of the alarm can be programmed for 30, 60, or 90 seconds. 

Re-entry delay can be programmed to prevent these wireless alarm systems from going off for 15 seconds, 8 seconds, or zero seconds giving you time to disarm the unit. 

Installation:

Wall mountable with included screws and screw anchors. Recommended height is between 3 to 6.5 feet (1 to 2 meters) above floor for best coverage of protection area. 

Detection head can be flipped up for use as a shelf mounted alarm. No need to permanently mount in place. These simple wireless security systems can easily be moved from one location to another, anytime you want. 

Intrusion memory indicator - 

The wireless motion detector alarm "remembers" if someone has set off the alarm. When you disarm the unit, if the LED flashes 3 times, it indicates that there has been an intrusion during the last arming mode. Be sure to check your home/office or rv thoroughly after entering.